Note that this reflects the use of Santiago's effective hard edge model, so the strengths of quads and solenoid need be divided by some factor (in the magnet table) to get the peak strengths, e.g. for use with the full profile in WARP.  Note also that the strengths quoted are for matching the 23.5 mA beam.  For matched settings for other beams, see the Matching Settings table.

! Define Magnets
! Focusing quads (-ve for electrons)
NQF:    QUADRUPOLE,L=0.05164,K1=-161.02
YQF:    QUADRUPOLE,L=0.0745,K1=-121.30

! De-Focusing quads (+ve for electrons)
NQD:    QUADRUPOLE,L=0.05164,K1=161.02
YQDR:    QUADRUPOLE,L=0.0745,K1=129.35
YQDI:   QUADRUPOLE,L=0.0745,K1=129.35

! Note that YQDR (ring) and YQDI (injector) is off-centered and tilted in the horizontal plane
EALIGN,YQDR,DX=0.01389,DTHETA=-0.174533,DS=-0.00123413
EALIGN,YQDI,DX=-0.01389,DTHETA=0.174533,DS=-0.00123413


! Dipoles: Bending, Pulsed, Short, and small/large Flange Dipoles
BD:     RBEND,L=0.0386,ANGLE=0.174533,FINT=0.45
PD:     RBEND,L=0.0518,ANGLE=0.10472,FINT=0.45
SD:     HKICKER
F1D:    KICKER
F2D:    VKICKER
F2DD:   KICKER

!
! How to model the Helmholtz coils and the Earth Field???
!

! Diagnostics: Current Monitor, Phosphor Screen, and Beam Position Monitors
CM:     MONITOR,L=0.0
PS:     MONITOR,L=0.0
BPM:    MONITOR,L=0.05

! Do the Injector Separately, reversing bend angles on Y

SOL:    SOLENOID,L=0.0651,KS=143.97

STRAIGHT: SEQUENCE
    GTV:    MARKER, AT=0.0
    SOL1:   SOL,    AT=0.1766
    S1:     SD,     AT=0.251
    P1:     PS,     AT=0.2608
    M1:     BPM,    AT=0.328
    Q1:     NQD,    AT=0.400,K1=96.69
    S2:     SD,     AT=0.465
    Q2:     NQF,    AT=0.535,K1=-166.52
    BERG:   CM,     AT=0.617
    S3:     SD,     AT=0.665
    Q3:     NQD,    AT=0.7241,K1=152.13
    P2:     PS,     AT=0.7688
    M2:     BPM,    AT=0.836
    Q4:     NQF,    AT=0.9179,K1=-150.44
    ENDM:   MARKER, AT=0.9749
ENDSEQUENCE

INJY: SEQUENCE
    VK:     F2DD,   AT=0.0
    Q5:     NQD,    AT=0.0866,K1=156.36
    SD5:    BD,     AT=0.1330,ANGLE=0.0
    Q6:     NQF,    AT=0.2465,K1=-166.94
    SD6:    SD,     AT=0.2776,KICK=0.03491
    YQ:     YQDI,   AT=0.3982
    B2:     PD,     AT=0.4774,ANGLE=-0.10472
    QR1:    YQF,    AT=0.5582
    ENDM:   MARKER, AT=0.6382
ENDSEQUENCE

INJECTOR:   LINE=(STRAIGHT, INJY)
            USE,INJECTOR